Changing the drum on a brother hl 2140 printer

Changing the drum on a brother hl 2140 printer how to#

You can check pricing on the Brother HL-5470DW TN-720 drum cartridge here.Дo you need to replace the toner on your HL-5470DW as well? You can buy the TN-720 toner cartidge from Amazon, or you can buy the TN-750 High-Yield cartridge and get more pages from your cartridge. However, if you do notice a decline in print quality after resetting your HL-5470DW cartridge, then it might be time to replace the drum. The signs of a failing drum typically include random black spots on your printed page, blurry printing, or an overall decline inВ print quality.

If it doesnвЂ™t seem like the quality of your prints is decreasing, then you might be OK simply resetting the counter, instead of replacing the drum.

If you use the TN-750 cartridges (the high-yield, and more expensive option) then you should be getting about 8,000 pages per cartridge, which means that the drum should last through about four replacements. For the sake of reference, a TN-720 toner cartridge should provide approximately 3,000 pages, which means that an HL-5470DW drum should last through 10 toner replacements. If the printer is indicating that you need to replace the drum, and you havenвЂ™t gotten close to this printed page count, then youВ can try resetting the drum counter if you havenвЂ™t replaced the drum. Separate the toner cartridge from the drum unit by pressing down on the green lever. Remove the drum unit and toner cartridge from the printer. Wait for the machine to cool down for at least ten minutes.

Changing the drum on a brother hl 2140 printer how to#

As mentioned previously, Brother identifies the typical page count of a Brother HL-5470DW drum to be about 30,000 pages. How do you change the drum on a Brother HL 2270dw How to replace the drum unit: Turn on the printer.

Press and hold the green Go button for 5 seconds, until you see Drum Clear.

Summary вЂ“ How to reset the drum counter on a Brother HL-5470DW вЂ“ You can then close the front cover and return to normal printer operation. Step 3: Press and hold the green Go button for five seconds, until you see a message on the display that says Drum Clear. Step 2: Open the front cover of the printer by pressing the front cover release, then pulling the front cover forward.

These steps were performed on a Brother HL-5470DW printer after the drum unit was replaced. Resetting Drum Life After Drum Replacement on Brother HL-5470DW Fortunately this process takes only a minute or two, then you will be able to return to your normal printing without the nuisance of the warning message. This is because you also need to reset the drum life counter on the Brother HL-5470DW. Brother states that the typical drum life is approximately 30,000 pages.Д«ut you may have replaced the drum unit, only to find that the printer is still indicating that the drum life is low.

You usually need to replace the drum on the 5470DWВ when the printer indicates that the drum life is getting low. This is the part in the printer into which the toner cartridge is placed. But, less frequently, it also needs to have its drum unit replaced. The Brother HL-5470DW laser printer, like every other laser printer, periodically needs to have its toner cartridge replaced.